Endress+Hauser Liquiline M CM42 - Ordering Information; Product Structure

27
Ordering information
Product structure
Sensor input
ANo Module
C Conductivity, conductive measurement
I Conductivity, inductive measurement
J Digital sensor: turbity
K Digital sensor: conductivity, conductive measurement
L Digital sensor: conductivity, inductive measurement
M Digital sensor: pH/ORP with glass electrodes
N Digital sensor: pH with ISFET sensors
O Digital sensor: amperometric oxygen measurement
P pH (glass/ISFET) or ORP
R pH/ORP glass (2 high In+1 Ref) or ISFET
Approval
A Non-hazardous area, CSA GP
G Atex II (1)2G EEx ia/ib IIC T6 / II 3 D
H Atex II 3G EEx na II T6
N NEPSI Ex nA II T6
P FM IS NI Cl. I, Div. 1&2, Groups A-D
S CSA IS NI Cl. I, II, III, Div. 1&2, Groups A-G
TTIIS
Certificate
A not selected
B Test certificate acc. to EN 10204, 3.1
C Test certificate acc. to EN 10204, 3.1, factory calibration certificate
Output
0 1 current output 4 to 20 mA, Hart
®
1 2 current outputs 4 to 20 mA, 1x Hart
®
2 PROFIBUS PA
3 FOUNDATION Fieldbus
Housing
0 Plastic
1 Stainless steel 1.4301 (AISI 304)
Cable entry
0M20 x 1.5
1NPT ½"
2G½
Software
EA Standard version
EB Advanced version
EC Advanced Plus version
Device language
C Czech/En (Czech docs)
DDe/En (German docs)
E En/De (English docs)
F Fr/En (French docs)
J Ja/En (Japanese docs)
L Pl/En (Polish docs)
N Nl/En (Dutch docs)
P Po/En (Portuguese docs)
R Ru/En (Russian docs)
S Es/En (Spanish docs)
T It/En (Italian docs)
Z Zh/En (Chinese docs)
Documentation
0 Installation and configuration
1 Installation and configuration + safety manual
Additional equipment
0 Basic version
CM42- complete order code