28
Scope of delivery The scope of delivery comprises (depending on the device version):
• A transmitter acc. to the ordered version
• A mounting plate including 4 screws
• A sticker sheet (embedded in the housing, containing nameplates and terminal assignment stickers)
• A test certificate acc. to EN 10204-3.1 (optional)
• A factory calibration certificate
• An Operating Instructions BA381C "Commissioning"
• An Operating Instructions BA382C "Operation"
• A Safety Manual acc. to SIL 2 (optional)
• A CD ROM with additional documentation
Accessories
Mounting kits • Post mounting kit for plastic housing
– 1 Mounting plate
– 2 Securing screws
order no. 51518263
• Post mounting kit for stainless steel housing
– 1 Mounting plate
– 2 Securing screws
order no. 51518286
• Panel installation kit for plastic housing
for panel cutout 138x138 mm (5.43x5.43 inch)
– 1 Panel installation seal
– 2 Tensioning screws M6x150 mm
– 4 Hexagonal nuts M6, DIN934 A2
– 4 Spring washers, A2 DIN127, Form B6
– 4 Washers A6.4, DIN125 A2
order no. 51518173
• Panel installation kit for stainless steel housing
for panel cutout 138x138 mm (5.43x5.43 inch)
– 1 Panel installation seal
– 2 Tensioning screws M6x150 mm
– 4 Hexagonal nuts M6, DIN934 A2
– 4 Spring washers, A2 DIN127, Form B6
– 4 Washers A6.4, DIN125 A2
order no. 51518284
Weather protection cover • Weather protection cover for plastic housing
order no. 51517382
• Weather protection cover for stainless steel housing
order no. CYY101-A
Active barrier Active barrier RN221N
• With power supply for safe separation of 4 to 20 mA current circuits
• Technical Information TI073R/09/en
Fieldbus accessories • HART handheld terminal DXR 375
– For communicating with a HART-compatible device via a 4 to 20 mA line
order no. DXR 375
• HART modem Commubox FXA191
– Interface module between HART and serial PC interface
– Technical Information TI237F/00/en
order no. 016735-0000
• Fieldbus connection socket
– FOUNDATION Fieldbus M20 7/8" connection
order no. 51517974
To Next Page
Loading...
