Endress+Hauser Liquiphant FTL64 - Mounting: Housing and Cable Entry; Cable Entry Alignment and Housing Rotation; Closing the Housing Cover Safely

Liquiphant FTL64
18 Endress+Hauser
LED module VU120 (optional)
Supply voltage
U = 12 to 55 V
DC
,
U = 19 to 253 V
AC
, 50 Hz/60 Hz
Power consumption
P ≤ 0.7 W, S < 6 VA
Current consumption
I
max
= 0.4 A
Signaling of operational
status
MAX
RD
YE
GN
MIN
RD
GN
YE
A0039258
 15 LED module, the LED lights up in green (GN), yellow (YE) or red (RD)
A brightly lit LED indicates the operational status (switch status or alarm status). The LED module
can be connected to the following electronic inserts: FEL62, FEL64, FEL64DC.
See the accompanying Operating Instructions for more detailed information on connection and
the switching states. The documentation currently available can be found on the
Endress+Hauser website: www.endress.com → Downloads.
Bluetooth module and Heartbeat Technology
Bluetooth module VU121
(optional)
Contains
FCC ID:
IC:
A0039257
 16 Bluetooth module VU121
• The Bluetooth module can be connected via the COM interface to the following electronic inserts:
FEL61, FEL62, FEL64, FEL64 DC, FEL67, FEL68 (2-wire NAMUR).
• The Bluetooth module is only available in conjunction with the Heartbeat Verification +
Monitoring application package.
• The Bluetooth module with battery is suitable for use in hazardous areas.
• The Bluetooth module must be ordered separately, including the required battery, for use in
conjunction with electronic insert FEL68 (2-wire NAMUR).