Liquiphant FTL64
Endress+Hauser 35
JIS flanges B2220
Pressure rating Type Material Weight
20K 20K 50A 316L (1.4404) 1.9 kg (4.19 lb)
Process connection, sealing surface
• Thread ISO228, G
• Thread ASME, MNPT
• Thread EN10226, R
• Flange ASME B16.5, RF (Raised Face)
• Flange ASME B16.5, FF (Flat Face)
• Flange ASME B16.5, RTJ (Ring Type Joint)
• Flange EN1092-1, Form A
• Flange EN1092-1, Form B1
• Flange EN1092-1, Form E
• Flange JIS B2220, RF (Raised Face)
• Flange HG/T20592, RF (Raised Face), in preparation
• Flange HG/T20615, RF (Raised Face), in preparation
• Flange HG/T20615, RJ (Ring Joint), in preparation
Weight
Basic weight: 1.35 kg (2.98 lb) for application 230 °C (446 °F)
The basic weight comprises:
• Sensor (compact), sensor with extension pipe
• Electronic insert
• Housing: single compartment, plastic with cover
• Thread, G ¾"
Weight differences result from the housing, LED or Bluetooth module (incl. high cover).
In addition to the basic weight:
Bluetooth module
0.1 kg (0.22 lb)
LED module
0.1 kg (0.22 lb)
Housing
• Single compartment, aluminum, coated: 0.8 kg (1.76 lb)
optional LED module or Bluetooth module with high cover:0.38 kg (0.84 lb)
• 316L cast: 2.1 kg (4.63 lb)
• Dual compartment, L-shaped; aluminum coated: 1.22 kg (2.69 lb)
optional LED module or Bluetooth module with high cover:0.38 kg (0.84 lb)
Gas-tight feedthrough
0.2 kg (0.44 lb)
Probe length (Ra<3.2um/126uin)
• 1 000 mm : 0.9 kg (1.98 lb)
• 100 in: 2.3 kg (5.07 lb)
Process connections
See "Process connections" section
Plastic protective cover
0.2 kg (0.44 lb)
Materials Materials in contact with process
• Process connection and pipe extension: 316L (1.4435), optional 2.4602 (AlloyC22), optional PFA
coating (conductive)
• Tuning fork: S31803 (1.4462), optional 2.4602 (AlloyC22), optional PFA coating (conductive)
• Flanges: 316L (1.4404), optional PFA coating (conductive)
Flange plating: AlloyC22
To Next Page
Loading...
