Liquiphant FTL64
48 Endress+Hauser
Supplementary documentation
The certificates, approvals and other documentation currently available can be accessed as
follows:
Endress+Hauser website: www.endress.com → Downloads.
Special Documentation
• TI00426F: Weld-in adapter and flanges (overview)
• SD01622P: Weld-in adapter (installation instructions)
• SD02389F: Bluetooth module VU121
• SD02398F: Sliding sleeve for Liquiphant
Supplementary device-
dependent documentation
Document type: Operating Instructions (BA)
Installation and initial commissioning ‒ contains all functions in the operating menu that are
required for a typical measuring task. Functions beyond this scope are not included.
BA02037F
Document type: Brief Operating Instructions (KA)
Quick guide to the first measured value ‒ includes all essential information from the incoming
acceptance to the electrical connection.
KA01480F
Document type: Safety Instructions, certificates
Depending on the approval, Safety Instructions are also supplied with the device, e. g. XA. This
documentation is an integral part of the Operating Instructions.
The nameplate indicates the Safety Instructions (XA) that are relevant to the device.
Registered trademarks
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by Endress+Hauser is under license. Other trademarks and trade names are
those of their respective owners.
Apple®
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc.
Android®
Android, Google Play and the Google Play logo are trademarks of Google Inc.
To Next Page
Loading...
