Endress+Hauser Liquiphant FTL64 - Page 3

Liquiphant FTL64
Endress+Hauser 3
Thermal shock .............................. 26
Process pressure range ........................ 26
Test pressure ............................... 27
State of aggregation ........................... 27
Density ................................... 27
Viscosity .................................. 27
Pressure tightness ........................... 27
Solids contents .............................. 28
Lateral loading capacity ........................ 28
Mechanical construction .................... 28
Design, dimensions ........................... 28
Weight ................................... 35
Materials .................................. 35
Surface roughness ........................... 36
Operability ............................... 36
Operating concept ............................ 36
Elements on the electronic insert .................. 37
Terminals ................................. 37
Local operation ............................. 37
Local display ................................ 38
Remote interrogation ......................... 38
Diagnostic information ........................ 39
Certificates and approvals ................... 39
CE mark .................................. 39
RCM-Tick marking ............................ 39
Ex approval ................................ 39
Overfill protection ............................ 40
Functional safety ............................ 40
Marine certificate ............................ 40
Radio approval .............................. 40
CRN approval ............................... 40
Test reports ................................ 40
Pressure Equipment Directive .................... 41
Process seal as per ANSI/ISA 12.27.01 .............. 41
China RoHS symbol ........................... 41
RoHS ..................................... 41
Additional certification ......................... 41
ASME B 31.3 ............................... 41
Ordering information ....................... 42
TAG ..................................... 42
Application packages ....................... 42
Heartbeat Technology module .................... 42
Heartbeat Verification ......................... 43
Proof testing for SIL/WHG devices ................. 43
Accessories .............................. 43
Test magnet ................................ 43
Weather protection cover for dual-compartment housing,
aluminum ................................. 43
Protective cover for single compartment housing,
aluminum or 316L ............................ 44
Plug-in jack ................................ 44
Bluetooth module VU121 (optional) ................ 44
LED module VU120 (optional) .................... 45
Sliding sleeves for unpressurized operation ........... 45
High pressure sliding sleeves ..................... 46
Supplementary documentation ............... 48
Special Documentation ......................... 48
Supplementary device-dependent documentation ....... 48
Registered trademarks ...................... 48