Liquistation CSF33 Product description
Endress+Hauser 11
3.2 Equipment architecture
3.2.1 Slot and port assignment
The electronics configuration follows a modular concept:
• There are several slots for electronics modules.
• These slots are numbered consecutively in the housing. Slots 0 and 1 are always reserved
for the basic module.
• In addition there are also inputs and outputs for the control module. These slots are
labeled "S".
• Each electronics module has one or more inputs and outputs or relays. Here they are all
collectively known as "ports".
• Ports are consecutively numbered per electronics module and are recognized
automatically by the software.
• Outputs and relays are named according to their function, e.g. "current output", and are
displayed in ascending order with the slot and port numbers.
Example:
"Current output 2:1" shown on the display means: slot 2 (e.g. AOR module) : port 1
(current output 1 of the AOR module)
• Inputs are assigned to measuring channels in the ascending order of "slot:port number"
Example:
To Next Page
Loading...
