Endress+Hauser Liquistation CSF33 - Return; Disposal

Repair Liquistation CSF33
170 Endress+Hauser
13.1.4 Sample compartment
31
32
33
34
35
A0013809
 52 Sample compartment, upper part
Item No. Description and contents Order number
Spare parts kit
31 Complete distribution arm drive shaft 71113519
32 Distribution arm motor with housing and
securing screws
71113519
33 Gasket for dosing chamber door and sampling
compartment door
71103293
34 Outlet pipe with thread adapter nut 71110970
35 Outlet pipe with thread adapter nut 71098113
13.2 Return
The product must be returned if repairs or a factory calibration are required, or if the
wrong product was ordered or delivered. As an ISO-certified company and also due to legal
regulations, Endress+Hauser is obliged to follow certain procedures when handling any
returned products that have been in contact with medium.
To ensure the swift, safe and professional return of the device:
‣
Refer to the website www.endress.com/support/return-material for information on the
procedure and conditions for returning devices.
13.3 Disposal
The device contains electronic components. The product must be disposed of as electronic
waste.
‣
Observe the local regulations.
Batteries must always be disposed of in accordance with local regulations on battery
disposal.