Endress+Hauser Liquistation CSF33 - 11.13 Status of Inputs;Outputs

Diagnostics and troubleshooting Liquistation CSF33
152 Endress+Hauser
• Vacuum pump (for version with vacuum pump):
Displays the pump operating time in hours and minutes
• Sample totalizer (for version with peristaltic pump):
Number of all samples taken and sample errors
• Pump tube life (for version with peristaltic pump):
Displays how old the tube is in days, hours and minutes
• Peristaltic pump (for version with peristaltic pump):
Displays the pump operating time in hours and minutes
This counter must be reset when a tube is replaced.
• Filter mats:
Displays the period of usage in days
• Operating time photometer:
Displays the hours of operation in hours
• Operating time cooling module:
(optional): Displays the period of usage in days.
With Reset set the specific counter reading to zero.
11.13 Status of inputs/outputs
Path: Display/Measurement
The following measured values are listed (read only):
• Binary inputs
Current function state: on or off
• Current inputs
Actual current values of all the current inputs available
• Relay
Current function state: on or off
• Binary outputs
Current function state: on or off
• Temperature sensors
Current value is displayed
• Current outputs
(for version with sensors with the Memosens protocol) Actual current values of the
current outputs