Endress+Hauser Liquistation CSF33 - Connecting Modules and Sensors

Liquistation CSF33 Electrical connection
Endress+Hauser 25
6.2 Connecting modules and sensors
6.2.1 Connection compartment in the controller housing
A0012843
1
2
A0013238
1 1 E base module
2 Sampler controller
The controller housing has a separate connection
compartment. Release the six cover screws to open the
connection compartment:
‣
Release 6 cover screws with a Phillips screwdriver
to open the display cover.
Display cover open, version with L base module
6.2.2 Base module SYS
1
2
3
5
4
SD
BASE-SYS
Display
Int. Com
Service
Power
24V DC
L-
L+
A0013172
 17 SYS base module
1 SD card slot 4 Connecting cable to sampler controller
1)
2 Slot for the display cable
1)
5 Voltage connection
1)
3 Service interface
1)
1) Internal device connection. Do not disconnect the plug!