Maintenance Liquistation CSF33
166 Endress+Hauser
12.4.4 Ventilator and liquefier
A0013898
47 Cleaning the climate control module
1 Liquefier
2 Ventilator
‣
Clean the liquefier and ventilator with compressed air.
12.4.5 Digital sensors
L
CAUTION
Cleaning not switched off during calibration or maintenance activities
Risk of injury due to medium or cleaning agent!
‣
If a cleaning system is connected, switch it off before removing a sensor from the
medium.
‣
If you wish to check the cleaning function and have therefore not switched off the
cleaning system, wear protective clothing, goggles and gloves or take other appropriate
measures.
12.5 Technical support
We recommend the purchase and use of an SD card (see accessories). You can save
the entire sampler configuration on the SD card (see "Data management" section) and
make the data available to the service team should you be in need of technical
assistance.
To Next Page
Loading...
