Endress+Hauser Liquistation CSF33 - Page 142

Diagnostics and troubleshooting Liquistation CSF33
142 Endress+Hauser
126.00
nA
34.00
nA
09.11.2011
14:02:20
23.11.2011
11:25:32
126.00
nA
34.00
nA
09.11.2011
14:02:20
23.11.2011
11:25:32
6.00
pH
09.11.2011
14:02:20
23.11.2011
11:25:32
09.11.2011
14:02:20
23.11.2011
11:25:32
12.00
pH
A0016688
 37 Simultaneous display of two graphs, the top one is "selected"
DIAG/Logbooks
Function Options Info
Data logbooks Chronological list of the data logbook entries for
sensors
Data logbook 1 ... 8
<Logbook name>
This submenu is available for each data logbook
that you have set up and activated.
Source of data Read only Input or mathematical function is displayed
Measured value Read only Measured value being recorded is displayed
Log time left Read only Display of days, hours and minutes until logbook
is full.
‣
Pay attention to the information on
selecting the memory type in the General
settings/Logbooksmenu.
Show Events are displayed Select a particular event to display more detailed
information.
Go to date User entry
• Go to date
• Time
Use this function to go directly to a specific time
in the list. In this way, you avoid having to scroll
through all the information. The complete list is
always visible, however.
Show plot Graphic display of the
logbook entries
The entries are displayed according to your
settings in the General settings/Logbooks.
Select 2nd plot Select another data
logbook
You can view a second logbook at the same time
as the current one.
Delete all entries Action You can use this to delete all data logbook
entries.
Save logbooks
File format Selection
• CSV
• FDM
‣
Save the logbook in the preferred file
format.
You can then open the saved CSV file on the PC
in MS Excel, for example, and make further edits
here.
1)
. You can import the FDM files into
FieldCare and archive them so that they are
tamper-proof.