Liquistation CSF33 Technical data
Endress+Hauser 177
Wetted parts Vacuum pump Peristaltic pump
Distribution arm Plastic PP
Distribution arm cover Plastic PE
Distribution plate Plastic PS
Composite container/bottles Plastic PE, glass (depending on version)
Intake hose Plastic PVC, EPDM (depending on version)
Hose connection Plastic PP
Rinse connection - -
Choose process seal depending on the application. Viton is recommended for standard
applications involving watery samples.
Vacuum pump only
Pneumatic hoses Silicone
Air Manager housing PC
Air Manager sealing plate Silicone
Pump head Aluminum, anodized
Pump membrane EPDM
Process connections • Vacuum pump:
Suction line ID 10 mm (3/8"), 13 mm (1/2"), 16 mm (5/8") or 19 mm (3/4")
• Peristaltic pump:
Intake hose ID 10 mm (3/8")
To Next Page
Loading...
