Endress+Hauser Liquistation CSF33 - Page 19

Liquistation CSF33 Installation
Endress+Hauser 19
2. As illustrated, guide the suction line upwards and through the opening towards the
front.
1
2
A0013704
 7 Sample supply from below
1 Gland for the suction line
2 Suction line
Connecting the suction line on version with vacuum pump
1
2
3
4
A0013707
 8 Connecting the suction line from the side (as-delivered
state)
1 Hose
2 Fixing clip for hose gland
3 Thread adapter nut
4 Hose gland
A0013708
 9 Suction line connected from below
1. Unscrew the thread adapter nut (item 3).
2. Unscrew the hose gland (item 4) from the side panel.
3. Fit the hose gland in the fixing clamp (item 2) as illustrated.
4. Screw the hose tight from above.
5. Attach the hose adapter supplied to the suction line and screw it onto the hose gland
from below.
6. Insert the dummy plugs supplied.