Liquisys M CLM223/253 Repair
Endress+Hauser 103
1. Press ENTER to confirm the serial number or cancel the entry to enter the number
again.
2. If available, enter the release codes for the Plus Package and/or Chemoclean in the
"Service" menu.
3. Check the Plus Package release (e.g. by opening the function group CHECK / Code P)
or the Chemoclean function.
4. Make the customized device settings again.
10.5 Return
The product must be returned if repairs or a factory calibration are required, or if the
wrong product was ordered or delivered. As an ISO-certified company and also due to legal
regulations, Endress+Hauser is obliged to follow certain procedures when handling any
returned products that have been in contact with medium.
To ensure swift, safe and professional device returns, please read the return procedures
and conditions at www.endress.com/support/return-material.
10.6 Disposal
The device contains electronic components and must therefore be disposed of in
accordance with regulations on the disposal of electronic waste.
Observe the local regulations.
To Next Page
Loading...
