A0024635
6 Field device on horizontal or vertical pipes
1 Securing screws
2 Fixing screws
3 Securing plate
Proceed as follows to mount the transmitter on a post:
1. Guide the two securing screws (1) of the mounting kit through the openings on the
securing plate (3).
2. Screw the securing plate onto the transmitter using the four fixing screws (2).
3. Secure the bracket with the field device on the post or pipe using the clip.
You can also secure the field device to the Flexdip CYH112 bracket in conjunction with the
weather protection cover. These can be acquired as accessories, see the "Accessories"
section.
A0027433
7 Field device on Flexdip CYH112 bracket with weather protection cover
To Next Page
Loading...
