A0008922-EN
16 Transmitter LC display
1 Indicator for measuring mode (normal operation)
2 Indicator for calibration mode
3 Indicator for setup mode (configuration)
4 Indicator for "Hold" mode (current outputs remain at last current state)
5 Indicator for receipt of a message on devices with communication
6 Indicator of working status of relays 3/4: inactive, active
7 Function code
8 In measuring mode: measured variable - in setup mode: configured variable
9 In measuring mode: secondary measured value - in setup/calibr. mode: e.g. set value
10 Indicator for autom. Temperature compensation
11 Indicator for man. Temperature compensation
12 "Error": error display
13 Sensor symbol (see the "Calibration" section)
To Next Page
Loading...
