Endress+Hauser Liquisys M CLM223 - Page 38

Commissioning Liquisys M CLM223/253
38 Endress+Hauser
Coding Field Range of
adjustment
(factory settings
in bold)
Display Info
A6 Enter the cable
resistance
0 Ω
0 to 99.99 Ω
A60
@
Cable-Res
A0009007-EN
Only for conductive sensors.
The standardized line
resistance must be multiplied
by the actual cable length.
CYK71: 0.165 Ω/m
A7 Enter the value
for measured
value damping
1
1 to 60
A7
Damping
1
A0009008-EN
Measured value damping
causes averaging over the
specified number of
individual measured values.
This is used, for example, to
stabilize the display if the
measurement is unstable.
There is no damping if “1” is
entered.