Endress+Hauser Micropilot FMR60B - Operation; Reading off the Device Locking Status; Reading off Measured Values; Adapting the Device to Process Conditions

Micropilot FMR60B PROFINET with Ethernet-APL Operation
Endress+Hauser 25
 Cover lock tightened correctly?
12 Operation
12.1 Reading off the device locking status
Displaying active write protection:
• In the Locking status parameter
Menu path of local display: at the top operating level
Menu path of operating tool: System → Device management
• In the operating tool in the header
12.2 Reading off measured values
All the measured values can be read off using the Measured values submenu.
Navigation
"Application" menu → Measured values
12.3 Adapting the device to process conditions
The following menus are available for this purpose:
• Basic settings in the Guidance menu
• Advanced settings in:
• Diagnostics menu
• Application menu
• System menu
13 Commissioning
All configuration tools provide a commissioning assistant that supports the user when
setting the most important configuration parameters (Guidance menu Commissioning
wizard).
13.1 Preliminaries
The measuring range and the unit in which the measured value is transmitted correspond to
the data on the nameplate.
13.2 Function check
Before commissioning the measuring point, check whether the post-installation and post-
connection checks have been performed.
• →
A
Post-installation check
• →
A
Post-connection check