Endress+Hauser Micropilot FMR60B - Terminal assignment

Micropilot FMR60B PROFINET with Ethernet-APL Commissioning
Endress+Hauser 27
13.4 Configuring the operating language
13.4.1 Local display
Setting the operating language
To set the operating language, the display first needs to be unlocked:
1. Press the  key for at least 2 s.
 A dialog box appears.
2. Unlock the display operation.
3. Select the Language parameter in the main menu.
4. Press the  key.
5. Select the desired language with the  or  key.
6. Press the  key.
Display operation locks automatically (except in the Safety mode wizard):
• after 1 min on the main page if no key has been pressed
• after 10 min within the operating menu if no key has been pressed
13.4.2 Operating tool
Set display language
System → Display → Language
Selection in Language parameter; Visibility depends on order options or device settings
13.4.3 Web server
1
A0048882
1 Language setting