Endress+Hauser Proline Promag P 100 - Environmental and Process Requirements

Installation Proline Promag P 100
16 Endress+Hauser
A
A
1
2
3
2
A0016260

5 Horizontal orientation
1 EPD electrode for empty pipe detection
2 Measuring electrodes for signal detection
3 Reference electrode for potential equalization
Inlet and outlet runs
5 × DN³
³ 2 × DN
A0016275
For the dimensions and installation lengths of the device, see the "Technical Information"
document, "Mechanical construction" section
6.1.2
Requirements from environment and process
Ambient temperature range
Transmitter –40 to +60 °C (–40 to +140 °F)
Sensor • Flange material carbon steel: –10 to +60 °C (+14 to +140 °F)
•
Flange material stainless steel: –40 to +60 °C (–40 to +140 °F)
Liner Do not exceed or fall below the permitted temperature range of the liner .