Endress+Hauser Proline Prosonic Flow B 200 - Page 59

Proline Prosonic Flow B 200 HART Commissioning
Endress+Hauser 59
Parameter overview with brief description
Parameter Description User entry Factory setting
Device tag Enter the name for the measuring point. Max. 32 characters such as
letters, numbers or special
characters (e.g. @, %, /).
Prosonic Flow
10.4.2 Setting the system units
In the System units submenu the units of all the measured values can be set.
Navigation
"Setup" menu → Advanced setup → System units
‣
System units
Volume flow unit
Volume unit
Corrected volume flow unit
Corrected volume unit
Mass flow unit
Mass unit
Temperature unit
Pressure unit
Energy flow unit
Energy unit
Calorific value unit
Velocity unit