Endress+Hauser Proline Prosonic Flow B 200 - Page 64

Commissioning Proline Prosonic Flow B 200 HART
64 Endress+Hauser
Navigation
"Setup" menu → Current input
‣
Current input
Current span
4 mA value
20 mA value
Failure mode
Failure value
Parameter overview with brief description
Parameter Prerequsite Description Selection / User
entry
Factory setting
Current span – Select current range for
process value output and
upper/lower level for alarm
signal.
• 4...20 mA
• 4...20 mA NAMUR
• 4...20 mA US
Country-specific:
• 4...20 mA NAMUR
• 4...20 mA US
4 mA value – Enter 4 mA value. Positive floating-
point number
700 mbar
20 mA value – Enter 20 mA value. Positive floating-
point number
Depends on country
and nominal
diameter
Failure mode – Define input behavior in alarm
condition.
• Alarm
• Last valid value
• Defined value
Alarm
Failure value In the Failure mode
parameter, the Defined value
option is selected.
Enter value to be used by the
device if input value from
external device is missing.
Signed floating-point
number
0 mbar