Endress+Hauser Proline Prosonic Flow B 200 - Page 71

Proline Prosonic Flow B 200 HART Commissioning
Endress+Hauser 71
Configuring the frequency output
Navigation
"Setup" menu → Pulse/frequency/switch output
Structure of the wizard for the frequency output
Val. at min.freq
End of wizard
Invert outp.sig.
Volume flow
Off
Min. freq. value
Max. freq. value
Operating
mode
Val. at max.freq
Failure mode
Mass flow
Correct.vol.flow
Temperature
Actual value
Defined value
0 Hz
Failure freq.
Assign freq.
Methane
fraction
Corr CH4
volflow
Wobbe index
Energy flow
Calorific value
Ref. conditionsRef. conditions Ref. conditions
Cal. value calc.
Frequency
A0019213-EN
 21 "Pulse/frequency/switch output" wizard in the "Setup" menu: "Operating mode" parameter"Frequency" option