Endress+Hauser Proline Prosonic Flow B 200 - Page 86

Commissioning Proline Prosonic Flow B 200 HART
86 Endress+Hauser
Parameter Prerequsite Description Selection Factory setting
Totalizer operation mode One of the following options is
selected in the Assign process
variable parameter (→  85)
of the Totalizer 1 to 3
submenu:
• Volume flow
• Corrected volume flow
• Corrected methane volume
flow
*
• Mass flow
• Energy flow
*
Select totalizer calculation
mode.
• Net flow total
• Forward flow total
• Reverse flow total
Net flow total
Failure mode One of the following options is
selected in the Assign process
variable parameter (→  85)
of the Totalizer 1 to 3
submenu:
• Volume flow
• Corrected volume flow
• Corrected methane volume
flow
*
• Mass flow
• Energy flow
*
Define totalizer behavior in
alarm condition.
• Stop
• Actual value
• Last valid value
Stop
* Visibility depends on order options or device settings