Endress+Hauser Proline Prosonic Flow B 200 - Page 90

Commissioning Proline Prosonic Flow B 200 HART
90 Endress+Hauser
Navigation
"Setup" menu → Advanced setup → Administration
‣
Administration
Define access code
Device reset
Parameter overview with brief description
Parameter Description User entry / Selection Factory setting
Define access code Restrict write-access to parameters to
protect the configuration of the device
against unintentional changes via the local
display.
0 to 9 999 0
Device reset Reset the device configuration - either
entirely or in part - to a defined state.
• Cancel
• To factory defaults
• To delivery settings
• Restart device
Cancel
10.6 Configuration management
After commissioning, you can save the current device configuration, copy it to another
measuring point or restore the previous device configuration.
You can do so using the Configuration management parameter and the related options
found in the Configuration backup display submenu.
Navigation
"Setup" menu → Advanced setup → Configuration backup display
‣
Configuration backup display
Operating time
Last backup
Configuration management
Comparison result