Endress+Hauser Proline Prosonic Flow B 200 - Page 89

Proline Prosonic Flow B 200 HART Commissioning
Endress+Hauser 89
Parameter Prerequsite Description Selection / User
entry
Factory setting
Decimal places 3 A measured value is specified
in the Value 3 display
parameter.
Select the number of decimal
places for the display value.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
x.xx
Value 4 display A local display is provided. Select the measured value that
is shown on the local display.
Picklist see Value 1
display parameter
None
Decimal places 4 A measured value is specified
in the Value 4 display
parameter.
Select the number of decimal
places for the display value.
• x
• x.x
• x.xx
• x.xxx
• x.xxxx
x.xx
Language A local display is provided. Set display language. • English
• Deutsch
*
• Français
*
• Español
*
• Italiano
*
• Nederlands
*
• Portuguesa
*
• Polski
*
• русский язык
(Russian)
*
• Svenska
*
• Türkçe
*
• 中文 (Chinese)
*
• 日本語
(Japanese)
*
• 한국어 (Korean)
*
• ةّيبَرَعْلا (Arabic)
*
• Bahasa Indonesia
*
• ภาษาไทย (Thai)
*
• tiếng Việt
(Vietnamese)
*
• čeština (Czech)
*
English
(alternatively, the
ordered language is
preset in the device)
Display interval A local display is provided. Set time measured values are
shown on display if display
alternates between values.
1 to 10 s 5 s
Display damping A local display is provided. Set display reaction time to
fluctuations in the measured
value.
0.0 to 999.9 s 3.0 s
Header A local display is provided. Select header contents on local
display.
• Device tag
• Free text
Device tag
Header text The Free text option is
selected in the Header
parameter.
Enter display header text. Max. 12 characters
such as letters,
numbers or special
characters (e.g. @,
%, /)
------------
Separator A local display is provided. Select decimal separator for
displaying numerical values.
• . (point)
• , (comma)
. (point)
Backlight – Switch the local display
backlight on and off.

Only for device version
with local display SD03
(touch control)
• Disable
• Enable
Disable
* Visibility depends on order options or device settings
10.5.3 Administration configuration
The Administration submenu contains administrative parameters.