Endress+Hauser Proline Prosonic Flow B 200 - Page 97

Proline Prosonic Flow B 200 HART Operation
Endress+Hauser 97
11 Operation
11.1 Adjusting the operating language
Information →  57
For information on the operating languages supported by the measuring device
→  146
11.2 Configuring the display
• Basic settings for local display →  78
• Advanced settings for local display →  87
11.3 Reading measured values
With the Measured values submenu, it is possible to read all the measured values.
11.3.1 Process variables
The Process variables submenu contains all the parameters needed to display the current
measured values for every process variable.
Navigation
"Diagnostics" menu → Measured values → Process variables
‣
Process variables
Volume flow
Corrected volume flow
Corrected methane volume flow
Mass flow
Energy flow
Dry methane in %
Calorific value
Wobbe index
Temperature
Sound velocity