Endress+Hauser Proline Prosonic Flow P 500 - Electrical Connection; Electrical Safety Guidelines; Connecting Requirements

Proline Prosonic Flow P 500
46 Endress+Hauser
3. Fit the sensor housing on the sensor holder.

A0043377
 35 Fitting the sensor housing
4. Lock the bracket in place to fix the sensor housing on the sensor holder.

A0043378
 36 Fixing the sensor housing
5. Connect the sensor cable to the adapter cable.
 This completes the mounting procedure. The sensors can now be connected to the
transmitter via the connecting cables.
• The visible measuring pipe surface must be clean (free from flaking paint and/or rust) to
ensure good acoustic contact.
• If necessary, the holder and sensor housing can be secured with a screw/nut or a lead seal
(not supplied).
• The bracket can only be released using an auxiliary tool (e.g. screwdriver).