Proline Prosonic Flow P 500
76 Endress+Hauser
System components
Accessories Description
Memograph M graphic
data manager
The Memograph M graphic data manager provides information on all the relevant
measured variables. Measured values are recorded correctly, limit values are
monitored and measuring points analyzed. The data are stored in the 256 MB
internal memory and also on a SD card or USB stick.
• Technical Information TI00133R
• Operating Instructions BA00247R
iTEMP The temperature transmitters can be used in all applications and are suitable for
the measurement of gases, steam and liquids. They can be used to read in the
medium temperature.
"Fields of Activity" document FA00006T
Supplementary documentation
For an overview of the scope of the associated Technical Documentation, refer to the following:
• W@M Device Viewer (www.endress.com/deviceviewer): Enter the serial number from
nameplate
• Endress+Hauser Operations App: Enter the serial number from the nameplate or scan the
2D matrix code (QR code) on the nameplate
Standard documentation Brief Operating Instructions
Brief Operating Instructions for the sensor
Measuring device Documentation code
Proline Prosonic Flow P KA01474D
Brief Operating Instructions for transmitter
Measuring device
Documentation code
HART Modbus RS485
Proline 500 KA01475D KA01476D
Operating Instructions
Measuring device Documentation code
HART Modbus RS485
Prosonic Flow P 500 BA02025D BA02026D
Description of Device Parameters
Measuring device
Documentation code
HART Modbus RS485
Prosonic Flow P 500 GP01147D GP01148D
Device-dependent
additional documentation
Safety instructions
Safety instructions for electrical equipment for hazardous areas.
Contents Documentation code
ATEX/IECEx Ex ia XA02091D
ATEX/IECEx Ex ec XA02092D
To Next Page
Loading...
