Proline Prosonic Flow P 500
Endress+Hauser 73
Heartbeat Technology
Package Description
Heartbeat Verification
+Monitoring
Heartbeat Verification
Meets the requirement for traceable verification to DIN ISO 9001:2008
Chapter 7.6 a) "Control of monitoring and measuring equipment".
• Functional testing in the installed state without interrupting the process.
• Traceable verification results on request, including a report.
• Simple testing process via local operation or other operating interfaces.
• Clear measuring point assessment (pass/fail) with high test coverage within the
framework of manufacturer specifications.
• Extension of calibration intervals according to operator's risk assessment.
Heartbeat Monitoring
Continuously supplies data, which are characteristic of the measuring principle, to
an external condition monitoring system for the purpose of preventive
maintenance or process analysis. These data enable the operator to:
• Draw conclusions - using these data and other information - about the impact
the measuring application has on the measuring performance over time.
• Schedule servicing in time.
• Monitor the process or product quality, e.g. gas pockets.
Accessories
Various accessories, which can be ordered with the device or subsequently from Endress+Hauser, are
available for the device. Detailed information on the order code in question is available from your
local Endress+Hauser sales center or on the product page of the Endress+Hauser website:
www.endress.com.
Device-specific accessories For the transmitter
Accessories Description
Transmitter
Proline 500
Transmitter for replacement or storage. Use the order code to define the following
specifications:
• Approvals
• Output
• Input
• Display/operation
• Housing
• Software
Proline 500 transmitter:
Order number: 9X5BXX-*********B
Proline 500 transmitter for replacement:
It is essential to specify the serial number of the current transmitter when
ordering. Based on the serial number, the device-specific data of the
replacement device can be used for the new transmitter.
Proline 500 transmitter: Installation Instructions EA01152D
External WLAN antenna External WLAN antenna with 1.5 m (59.1 in) connecting cable and two angle
brackets. Order code for "Accessory enclosed", option P8 "Wireless antenna wide
area".
• The external WLAN antenna is not suitable for use in hygienic
applications.
• Further information on the WLAN interface → 66.
Order number: 71351317
Installation Instructions EA01238D
Pipe mounting set Pipe mounting set for transmitter.
Installation Instructions EA01195D
Proline 500 transmitter
Order number: 71346428
To Next Page
Loading...
