Endress+Hauser Proline t-mass 65I Brief Operating Instructions

KA021D/06/en/06.10
71115118
Brief Operating Instructions
Proline t-mass 65
Thermal Mass Flow Measuring System
6
8
9
MODBUS
These Brief Operating Instructions are not intended to replace the
Operating Instructions provided in the scope of supply.
Detailed information is provided in the Operating Instructions and
the additional documentation on the CD-ROM supplied.
The complete device documentation consists of:
• These Brief Operating Instructions
• Depending on the device version:
– Operating Instructions and the Description of Device Functions
– Approvals and safety certificates
– Special safety instructions in accordance with the approvals for
the device (e.g. explosion protection, pressure equipment
directive etc.)
– Additional device-specific information

Endress+Hauser Proline t-mass 65I Specifications

General

Measurement Principle	Coriolis
Power Supply	24 V DC
Device Type	Mass Flow Meter
Repeatability	±0.05% of rate
Process Pressure	up to 40 bar
Wetted Materials	316L stainless steel
Output Signals	4 to 20 mA, pulse output
Communication	HART
Approvals	ATEX, IECEx
Ingress Protection	IP66
Process Connection	Flanged, threaded