Endress+Hauser promag 30 - Page 9

The measuring equipment comprises:
• Transmitter Promag 30 and
• Sensor Promag A, D, F or H
Compact version
The Promag 30 transmitter
and the sensor together form
a mechanical unit.
Promag 30 A
Promag F
Promag 30
Promag 30 F
Promag 30 H
Promag D
Promag 30
Promag A
Promag 30
Promag 30 D
Promag 30
Promag H
Transmitter
Sensor
ba008y03
Remote-mounted version (FS version or FL version)
The transmitter is mounted remote from the sensor:
FS version
•
Up to 10 m distance meduim conductivity
min. 5
µ
S/cm
•
From 10
…
200 m distance max. cable length in terms
of the medium conductivity
(5...200
µ
S/cm)
FL version
•
Max. cable length 200 m, not dependent on
conductivity.
•
No EPD available.
•
The electrical connection between transmitter and
sensor is made in the connection housing
(exception: Promag A).
The wall mounting bracket for the transmitter is supplied.
Fig. 3
Promag 30 2. System Description
Endress+Hauser 9