Endress+Hauser Prosonic S FMU90 - 2.5 Supplied documentation

Identification
10
2.5 Supplied documentation
2.5.1 Operating instructions
(for transmitter FMU90)
Depending on the instrument version, the following operating instructions are supplied with the
Prosonic S FMU90:
These operating instructions describe installation and commissioning of the respective version of the
Prosonic S. It contains those functions from the operating menu, which are required for a standard
measuring task. Additional functions are contained in the "Descripiton of Instrument Functions" (BA
290F, see below).
2.5.2 Description of instrument functions
BA290F
contains a detailed description of all functions of the Prosonic S and is valid for all instrument
versions. A PDF file of this document can be found
• on the CD-ROM of the "ToF-Tool - FieldTool Package", which is supplied together with the
instrument
• in the internet at "www.endress.com"
2.5.3 Safety instructions
Additional safety instructions (XA, ZE, ZD) are supplied with certified device versions. Refer to the
nameplate for the names of the safety instructions that apply to your device version.
Operating instructions Output Application Instrument version
BA 288F
HART
• level measurement
• alternating pump control
• screen and rake control
FMU90 - *******1****
FMU90 - *******2****
BA 289F
•flow measurement
• backwater and dirt detection
• totalizers and counters
FMU90 - *2*****1****
FMU90 - *4*****1****
FMU90 - *2*****2****
FMU90 - *4*****2****
BA 292F
PROFIBUS DP
• level measurement
• alternating pump control
• screen and rake control
FMU90 - *******3****
BA 293F
•flow measurement
• backwater and dirt detection
• totalizers and counters
FMU90 - *2*****3****
FMU90 - *4*****3****