Endress+Hauser Prosonic S FMU90 - 3.4 Mounting the remote display and operating module

Installation
17
3.4 Mounting the remote display and operating module
3.4.1 Scope of delivery
If the Prosonic S is ordered with the display for cabinet door mounting, the following is contained
in the scope of delivery:
• Display and operating module, 96x96 mm
• 4 retainers (with nuts and screws)
• Connection cable (3 m) for connection to the transmitter
(preassembled with suitable plugs).
3.4.2 Dimensions of the separate display and operating module
L00-FMU90xxx-06-00-00-xx-004
Dimensions in mm
3.4.3 Mounting
1. Cut an opening of 92 x 92 mm into the intended mounting position (e.g. cabinet door).
2. Insert the remote display module into the opening and fix the retainers as shown in the
following figure:
L00-FMU90xxx-17-00-00-xx-002
96
55
max. 6
92
min. 11
≈0,5 kg
(a)
(b)
(c)
(d)