Operability Prothermo NMT81
46 Endress+Hauser
Menu Submenu / parameter Meaning
Sensor diagnostics Indicates:
• Alarm delay
• Configuration of diagnostic behavior
Application Measured values Indicates:
Measured values from sensors
• Vapor temperature
• Liquid temperature
• Product temperature
• Water temperature (if WB is installed)
• Water level (if WB is installed)
Measuring Units Set temperature unit and distance unit.
Sensor Contains all parameters required for sensor
adjustment.
HART output Changes:
• HART address
• HART short tag
• Device tag
• No. of preambles
• Loop current mode
System Device management Contains the settings of the overall system
which are not specific to the measuring
path, like measuring point name,
configuration counter, define welcome page,
reset (e.g. factory settings)
User management Contains the complete settings of the
offered user administration (role-based
or/and named user access concept) like
administration/set-up of the personal access
permissions.
Display (Option) Shows:
• Value 1, 2, 3, 4 display
• Decimal places 1, 2, 3, 4
Geolocation Settings and information of the location and
may the localization be arranged
Information Offers users general information concerning
the device and versions in a clearly arranged
manner.
Software configuration Shows W&M calibration CRC.
System for service menu Additional information Changes or shows in service mode as
following
• Serial number
• Software revision
• Build no. software
• Hardware revision
To Next Page
Loading...
