Endress+Hauser Prothermo NMT81 - Page 65

Prothermo NMT81 Commissioning
Endress+Hauser 65
3. Confirm that the HART short tag, date code, descriptor are correct, and select [Next].

A0044589
 57 Device identification screen 2
4. Select a unit of the temperature measurement: °C, °F, and K and a unit of the distance:
mm, cm, m, in, and ft.

A0044590
 58 Measurement adjustments screen
If check [Yes] in Expert setting, go to next step and if not, skip the next step.