Endress+Hauser RMS 621 - Communication

5 Operation RMS 621
28 Endress+Hauser
5.5 Communication
All units and unit versions can be set up, changed and read out using the standard interface, the
ReadWin
®
2000 PC software and a serial interface cable (see Chap. 8 ’Accessories’). This is
recommended if very complicated applications need to be set up (e.g. on initial commissioning).
!
Note!
For detailed information to how to set up the unit using the ReadWin
®
2000 PC operating software
can be found in the operating manual found on the data carrier.