9 Fault-finding RMS 621
56 Endress+Hauser
9.5 Returns
When returning the unit, e.g. for repair, please make sure that it is correctly packed. Optimum
protection is offered by the original packaging. Repairs must only be done by the service department
of the supplier. An overview of the E+H worldwide service network can be found in the addresses
on the back page of this operating manual.
!
Note!
When returning the unit for repair, please add a description of the unit fault and application.
9.6 Disposal
The unit contains electronic components and must be disposed of accordingly. Please take note of
the national regulations when disposing of the unit.
To Next Page
Loading...
