Endress+Hauser Soliwave FDR56 - 7 Operating Options; Overview

Soliwave FQR56/FDR56
Operating options
30
Endress+Hauser
7 Operating options
7�1 Overview
7�1�1 FDR56 transceiver
ThemicrowavebarrierisconguredontheFDR56usingafunctionselectionswitch(encoding
switch)andtwooperatingbuttons.Withthese,amongotherthink,theadjustmentofthe
sensitivity is carried out for clear and unambiguous limit detection of the products.
Theparametercongurationisstoredinternallyandisretainedevenaerthesupplyvoltage
is disconnected. No other operator intervention is necessary during operation.
The adjustment to the process conditions only needs to be performed during initial
installation. Later alterations can be performed and saved at any time.
1 2 3
4
5
6
16 DisplayandoperatingelementsoftheFDR56
1 Functionselectionswitch
2 ReadyLED(green)
3 Display
 -Signalstrengthinnormalmode
 -Functionnumberandfunctionvalueinconfigurationmode
4 SwitchoutputLED(yellow),relay
5 Operatingbuttonforincreaseortoggle
6 Operatingbuttonfordecreaseortoggle