Endress+Hauser Soliwave FDR56 - 12 Accessories

Soliwave FQR56/FDR56
Accessories
Endress+Hauser 51
12 Accessories
Detailed information on accessories can be found in the technical documentation
→
TI00443F/97/EN
Designation
Additional information
Mating connector •M12Binderseries713/763,4-pole
• Harting HAN8D
Prefabricated
connection cable
•M12Binderseries713/763,4-pole,length2m
•M12Binderseries713/763,4-pole,length5m
•HartingHAN8D,length2m
•HartingHAN8D,length5m
Mounting bracket • Aluminum
• Plastic
Installationange •Rp1½inaccordancewithEN1092-1:DN40toDN100,PN16,316Ti
•1½NPTinaccordancewithANSI/ASME:1½"to3NPT",150lbs,316Ti
•G1½inaccordancewithISO228-1:DN40toDN100,PN16,316Ti
•Optionallyavailablewithinspectioncerticateinaccordancewith
EN 10204-3.1
Window •Weldingassembly:DN50toDN100,Tmax+200°C,unpressurized,316Ti
•Weldingassembly:DN50toDN100,Tmax+200°C,Pmax1MPa
(10bar),316Ti
•Flangeassembly:DN50toDN100,Tmax+200°C,Pmax2.5MPa
(25bar),316Ti
High-temperature
adapter
•R1½/Rp1½,55mm(AF),316Ti
•1½NPT,55mm(AF),316Ti
Extension For high-temperature adapters and other accessories: 225 to 525 mm
(8.86to20.67in),R1½/Rp1½or1½NPT,55mm(AF),316Ti
High-pressure adapter • Process connection: G 1½ in accordance with ISO 228-1
• Device connection: G 1½ in accordance with ISO 228-1 (also suitable for
R 1½ in accordance with EN 10226) or 1½ NPT in accordance with ANSI/
ASME
• Material: 316Ti (window allowing radiation to pass through: PTFE)
•Optionallyavailablewithinspectioncerticateinaccordancewith
EN 10204-3.1
Weld-in nozzle
FAR50→TI01362F/97/EN
Insertion adapter
FAR51→TI01368F/97/EN
Process adapter
FAR52→TI01369F/97/EN
Spacer tube
FAR53→TI01370F/97/EN
Plug
FAR54→TI01371F/97/EN
Wave guide
FAR55→TI01372F/97/EN