Soliwave FQR56/FDR56
Repair
46
Endress+Hauser
11 Repair
The FQR56 and FDR56 devices of the Soliwave microwave barrier are not to be repaired on-site.
11�1 General notes
11�1�1 Repair policy
The Endress+Hauser repair policy provides that repairs to the modularly designed devices can
be carried out by Endress+Hauser Service or customers with corresponding training.
Spare parts are combined in useful kits and are accompanied by the associated replacement
instructions.Formoreinformationonserviceandspareparts,pleasecontactEndress+Hauser
Service.
11.1.2 RepairingEx-certieddevices
WhenrepairingEx-certieddevices,pleasealsonotethefollowing:
•Ex-certieddevicesmayberepairedonlybyproperlytrainedpersonnelorEndress+Hauser
Service.
•Relevantstandards,nationalregulationsandsafetyinstructions(XA)andcerticatesmust
be observed.
• Only original Endress+Hauser spare parts may be used.
•Whenorderingspareparts,pleasenotethedevicedesignationonthenameplate.
Parts may only be replaced with the same parts.
•Carryoutrepairsaccordingtotheinstructions.Followingarepair,theindividualtesting
prescribed for the device must be carried out.
•AcertieddevicemaybeconvertedtoanothercertiedversionbyEndress+HauserService
only.
•Allrepairsandmodicationsmustbedocumented.
11�1�3 Replacing the electronics or a device
Aerreplacingtheelectronicsoradevice(FDR56),anewcalibrationisrequired,sincethe
settings are saved in the electronic insert.
Ifyouarestillabletoreadoutthesettingsbeforemakingthereplacement,makenoteofthem
(→53)andreenterthemaerthereplacement.Inanyway,anewcalibrationmustbe
doneaerthat!
The electronics of device variants with connector and extended ordering option "electronics
encapsulated" can only be replaced by the manufacturer.
Detailsabouttheavailabledevicevariantscanbeviewedintheproductconguratoron
the Endress+Hauser homepage www.endress.com.