Endress+Hauser Soliwave FDR56 - Post-Installation Check

Soliwave FQR56/FDR56
Installation
Endress+Hauser 21
Fix the housing in place.
2 mm
•Iftheprocessconnectionisnotscrewedfarenoughintotheprocesswall,thereisariskthat
materialwillaccumulateinfrontoftheFQR56/FDR56,therebydampingthemicrowave
signal.
•If,ontheotherhand,theprocessconnectionisscrewedtoofarintotheprocess,thereisa
risk of damage occurring as a result of large product items falling.
5�3 Post-installation check

Is the device undamaged (visual inspection)?
 Doesthedeviceconformtothemeasuringpointspecications?
For example:
• Process temperature
• Process pressure
• Ambient temperature

Arethemeasuringpointidenticationandlabelingcorrect(visualinspection)?

Is the device adequately protected from moisture and direct sunlight?

Is the device properly secured?