Endress+Hauser Waterpilot FMX21 - Identification of Sensor Type

Waterpilot FMX21 Incoming acceptance and product identification
Endress+Hauser 13
Additional nameplate for devices with approvals
Mat.: 316L/1.4435/1.4404, Al O , PE, EPDM, PPO
2 3
For use in drinking water according to:
Made in Germany, D-79689 Maulburg
Waterpilot FMX21
250002737-B
1
23
A0018805
1 Approval symbol (drinking water approval)
2 Reference to associated documentation
3 Approval number (marine approval)
4.3.2 Additional nameplate for devices with external diameter 22 mm (0.87 in) and
42 mm (1.65 in)
x
Install per dwg. 96000xxxx-
Ser.-No.:
p
Waterpilot FMX21
Cal./Adj.
1 2 3 4 5 6 7
A0018804
1 Serial number
2 Nominal measuring range
3 Set measuring range
4 CE mark or approval symbol
5 Certificate number (optional)
6 Text for approval (optional)
7 Reference to documentation
4.4 Identification of sensor type
With gauge pressure or absolute pressure sensors, the "Pos. zero adjust" parameter is displayed
in the operating menu. With absolute pressure sensors, the "Calib. offset" parameter is
displayed in the operating menu.