Endress+Hauser Waterpilot FMX21 - Automatic Density Compensation; Linearization; Backing up or Duplicating the Device Data; Operation and Settings Via RIA15

Waterpilot FMX21 Commissioning
Endress+Hauser 41
9.9.7 Calibration with partially filled vessel (wet calibration)
See the Operating Instructions.
9.9.8 Level measurement with absolute pressure probe and external pressure signal
(electrical differential pressure)
See the Operating Instructions.
9.10 Automatic density compensation
See the Operating Instructions.
9.11 Linearization
See the Operating Instructions.
9.12 Backing up or duplicating the device data
See the Operating Instructions.
9.13 Operation and settings via RIA15
1
2
3
4
5
6
7
8
A0017719
 6 Display and operating elements of the process display unit
1 Symbol: operating menu disabled
2 Symbol: error
3 Symbol: warning
4 Symbol: HART communication active
5 Operating keys "-", "+", "E"
6 14-segment display for unit/TAG
7 Bar graph with indicators for under range and over range
8 5-digit 7-segment display for measured value, digit height 17 mm (0.67 in)