Endress+Hauser Waterpilot FMX21 - Dimensions; Mounting the Waterpilot with a Mounting Clamp

Waterpilot FMX21 Installation
Endress+Hauser 17
5.3 Dimensions
For dimensions, please refer to the Technical Information TI00431P/00/EN, "Mechanical
construction" section (see also: www.de.endress.com → Downloads → Media Type:
Documentation).
5.4 Mounting the Waterpilot with a mounting clamp
1
2
3
A0018793
1 Extension cable
2 Suspension clamp
3 Clamping jaws
5.4.1 Mounting the suspension clamp:
1. Mount the suspension clamp (item 2). Take the weight of the extension cable (item 1)
and the device into account when selecting the fastening point.
2. Push up the clamping jaws (item 3). Place the extension cable (item 1) between the
clamping jaws as shown in the graphic.
3. Hold the extension cable (item 1) in position and push the clamping jaws (item 3) back
down. Tap the clamping jaws gently from above to fix them in place.