15
www.enersys.com
Publication No. US-MP-OM-001
March 2017
6.3 Recommended Installation Equipment and Supplies
Before working with the battery system, be sure that you have the proper protective clothing,
safety equipment and insulated tools as specified in Section 2.0.
The following is a list of equipment typically recommended for installation of a PowerSafe
®
VRLA Battery System.
TABLE 6.2
EQUIPMENT RECOMMENDED
Forklift or Portable Lift Crane
Cell Lift Cart
Chalk Line
Torpedo Level (Plastic)
Torque Wrench (10-200 in-lbs)
Torque Wrench (50-100 ft-lbs)
Floor Anchors (User-supplied per battery system and stress analysis)
Floor Shims (User-supplied)
3/8" Drive Rachet Insulated Wrench with Minimum 3" Extension
with 5/16" thru 3/4" Sockets
Insulated Box Wrenches (5/8" thru 3/4")
Screwdrivers
Wipes, Paper or Cloth
Stiff-Bristle Nonmetallic Brush/Pad
Tape Measure (Nonmetallic)
Safety Equipment and Clothing
Small Paintbrush
NO-OX-ID Grease
CHECK IF
ON HAND
CAUTION
Be sure you have all the proper protective clothing and safety tools and
equipment on hand before starting the installation.
To Next Page
Loading...
Need help?
General
