EnGenius EAP600 - 6.2 IP Settings

34
6 System
6.1 Operation Mode
The EAP600 supports four operating modes: Access Point, WDS AP, WDS Bridge, and Repeater.
System Properties
Device Name
Enter a name for the device. The name you type appears in SNMP management. This name is
not the SSID and is not broadcast to other devices.
Country/Region
Select a Country/Region to conform to local regulations.
Operation Mode
Use the radio button to select an operating mode.
Save & Apply / Cancel
Click Save & Apply to confirm the changes or Cancel to cancel and return previous settings.