EnGenius EAP600 - 8.5 Backup;Restore

69
8.5 Backup/Restore
This page allows you to save the current device configurations. When you save the configurations, you also can reload the
saved configurations into the device through the Restore Saved Settings from A File section. If extreme problems occur, or
if you have set the EAP600 wrongly, you can use the Factory Default button in the Revert to Factory Default Settings
section to restore all the configurations of the EAP600 to the original default settings.
Backup/Restore
Save A Copy of Current
Settings
Click Backup to save the current configured settings.
Restore Saved Settings
from A File
To restore settings that have been previously backed up, click Browse, select the file, and
click Restore.
Revert to Factory Default
Settings
Click Factory Default button to restore the EAP600 to its factory default settings.