EnGenius EAP600 - 8.10 Diagnostics

74
8.10 Diagnostics
This page allows you to analyze the connection quality of the EAP600 and trace the routing table to a target in the
network.
Diagnosis
Target IP
Enter the IP address you would like to search.
Ping Packet Size
Enter the packet size of each ping.
Number of Pings
Enter the number of times you want to ping.
Start Ping
Click Start Ping to begin pinging target device (via IP).
Traceroute Target
Enter an IP address or domain name you want to trace.
Start Traceroute
Click Start Traceroute to begin the trace route operation.